One of the most neglected DIY maintenance items for your Harley is head bearing greasing. And it's actually one of the easiest maintenance items too.
Service interval:
1k and then every 10k
What you need:
1. Grease gun
2. HD special purpose grease cartilage
Steps:
1. Turn the steering to the left
2. Locate grease fitting on the steering neck
3. Connect your grease gun to the fitting
4. Pump the grease until it exudes from top or bottom of the steering neck
5. Disconnect the grease gun from the fitting and wipe out excess grease
That's it. You are done.
No comments:
Post a Comment